TCB-178 是由無機化合物和金屬氧化物混合組成的活性粉體。它與水混合可在室溫或低溫下(>5℃)快速反應固化形成陶瓷結構。由于其反應產物對無機填料,陶瓷, 石頭, 木材, 金屬等具有優良的粘結性, 是一種理想的無機粘結劑. 由于該材料具有阻燃, 耐熱和室溫快速固化等特性, 可廣泛應用于陶瓷, 石材, 涂料,耐火材料, 防火保溫, 木材, 廢物利用等系列復合材料中。

該材料不含任何有機揮發物(VOC)和有害重金屬是完全的綠色環保材料。

用該材料制作的復合材料無需加溫固化, 可大大減少生產過程的能量消耗(節能)。

TCB-178 is an active powder composed of a mixture of inorganic compounds and metal oxides. It mixes with water and can react and solidify rapidly at room temperature or low temperature (>5°C) to form a ceramic structure. Because its reaction product has excellent adhesion to inorganic fillers, ceramics, stones, wood, metals, etc., it is an ideal inorganic binder. Due to the properties of the material, such as flame retardant, heat resistance and rapid curing at room temperature, it can be Widely used in ceramics, stone, paint, refractory, fire insulation, wood, waste utilization and other series of composite materials.

The material does not contain any organic volatile compounds (VOC) and harmful heavy metals and is a completely green and environmentally friendly material.

The composite material made of this material does not need to be heated and cured, which can greatly reduce the energy consumption (energy saving) in the production process.

 

應用:

本產品是一種純無機(不含VOC)的綠色環保節能的粘合體系, 除良好的粘合特性外, 它具有阻燃, 耐熱, 耐火, 耐腐蝕, 室溫固化等特性. 客戶根據自己的應用設計產品. 一些典型的建議應用如表

This product is a pure inorganic (VOC-free) green, environmentally friendly and energy-saving adhesive system. In addition to good adhesive properties, it has the characteristics of flame retardant, heat resistance, fire resistance, corrosion resistance, room temperature curing and so on. Customers design products according to their own applications. Some typical suggested applications are shown in the table.

 建議的無機陶瓷基粘合劑的應用

Suggested applications for inorganic ceramic based adhesives:

應用方面	應用
結構陶瓷基復合材料Structural Ceramic Matrix Composites	1. 高強度結構材料High Strength Structural Materials 2.  耐火材料Refractory 3. 高溫和常溫防火保溫材料 High temperature and normal temperature fire insulation materials 4. 低溫下道路,橋梁表面修補 Road and bridge surface repair at low temperature 5. 常溫固化無機粘合劑和密封膠Normal temperature curing inorganic adhesives and sealants
木材復合材料 wood composite board	用木纖維,木削,竹纖維,秸稈,稻殼制作阻燃復合材料We can use wood fiber, wood chip, bamboo fiber, straw, rice husk to make flame retardant composite materials to make pumping or pouring refractory materials, non-burning refractory bricks.
耐火材料Refractory	制做泵送或澆注耐火材料,免燒耐火磚.Make pumping or pouring refractory, non-burning refractory bricks.
建筑涂料和金屬防護涂料Architectural coatings and metal protective coatings	雙組分室溫固化無機涂料.可在1小時后恢復使用.It‘s two-component room temperature curing inorganic coating. The protected object can be returned to use after 1 hour.
防水堵漏Waterproof plugging	在有水環境下快速固化達到防水和/或堵漏Fast cure in the presence of water for waterproofing and/or plugging
垃圾處理和肥料包覆Waste Disposal and Fertilizer Coating	將垃圾轉化為有用的材料或處理有毒有害物質Turn waste into useful materials or deal with toxic and hazardous substances
快速固化耐高溫混凝土Fast curing high temperature resistant concrete	用于鉆井,油田用固井高溫水泥.Used for drilling, oilfield cementing high temperature cement。